• Cylinder

    $115.00

    Replacement Cylinder

    The V4 Cylinder is compatible with all other versions of Vurtego pogo sticks, from the V1 to the V3. As is the case with the V3, the welded top cap prevents top end leaks, and the interior of the aluminum tube is super smooth to allow for the easiest possible ride. If your old cylinder has gotten scratched or dented, or if you have a V1 or V2, the new V4 replacement cylinder will be a match made in heaven. Looking for more great products? Shop our other air powered pogo stick replacement parts like the V4 Grip Tip.

    Universal Fit

    The green and white replacement cylinders work with all versions of Vurtego pogo sticks.
  • Grip Tip

    $20.00

    Grip Tip

    With the launch of the V4, we released our newly designed Grip Tip. Made from low-rebound urethane and shaped like a half-circle, this pogo stick rubber tip provides the same amount of surface area on every jump to help maximize traction and reduce slips, keeping you on your feet and off of your back. Purchase this pogo stick part from Vurtego today. The Grip Tip comes with bolt and lock washer.

    Universal Fit

    The Grip Tip works with all versions of Vurtego pogo sticks.
  • Handlebars 3 Pack

    You might notice that the handlebars on your Vurtego break or bend pretty easily. Unfortunately, they were designed that way for safety reasons. Rather than using a steel handlebar, we made the conscious decision to go with a softer aluminum composite, which has been tested to give way and break in the unlikely event that you happen to land on it. If you find that you are constantly breaking handlebars and would rather buy aluminum handlebars that don't bend or break, the outside diameter (OD) is a very common 7/8". A quick trip to a local metal supply shop will get you new handlebars for even cheaper than we can sell and ship them to you for...and they won't break all the time...however, we don't recommend it.

    Universal Fit

    Our pro handlebar pack works with all versions of Vurtego pogo sticks.
  • Lube Kit

    $10.00
    Our lube kits are made specifically for one thing: keeping your pogo stick in tip top shape. The included valve core tool is perfect for opening up the top of your pogo stick in a matter of seconds. The rest is as simple as squeezing a little bit of the supplied silicone oil lubricant into your stick. Even if you’re a total noob with tools, the entire process of adding this synthetic oil lubricant won’t take you more than a couple minutes to complete if you have this kit in hand. Even if you don't have this silicone oil lubricant kit, you will still be able to easily add lube on your own! This Lube Kit is good for 3 refills.
  • Shock Absorber Donut

    The newly updated shock bushing replacement donut is made from a specialized high-rebound urethane. The dual-sided nubs on this rubber bushing shock absorber help to reduce sound by 30% from our previous design, and the shelf life has been tripled or even better. Heck, we're not even sure why we need to sell replacements...unless you have an old V3 one and need to replace it with the indestructible piece of awesomeness.

    Universal Fit

    The urethane shock absorber works with all versions of Vurtego pogo sticks. In addition to this Urethane Shock Absorber, we also offer a SoftTop Aluminum Edge Protector.
  • Let's face it, kids grow too fast. Every time you buy the little boogers something new, they've already outgrown it. Because of that we find parents frequently buying too big kid hoping that they'll 'grow into it' in a year or two. The fit of our air compressed pogo sticks is vital for optimal performance – so check out our size chart to make sure you’re getting the proper size. Unfortunately, a pogo stick that's too large can be very difficult to use. For that reason, we offer size upgrade kits, which can be used to turn any sized Vurtego pogo stick into any other size. Luckily for you, there are only two parts on our air compressed pogo sticks that determine the size – the cylinder and the shaft. Unfortunately, those two parts are the most expensive on the entire pogo stick...
  • SoftTop Protector

    The SoftTop Foam Aluminum Edge Protector provides an extra layer of protection for the aluminum top cap of your Vurtego stick. It protects the aluminum from scratches and dings, and also protects your face from the hard aluminum. This pogo stick accessory snaps easily into place and can be held more firmly with an included o-ring.

    Universal Fit

    The SofTop works with all versions of Vurtego pogo sticks.
  • Bushing

    If you are doing lots of bouncing on your V2 or V3, and especially if you are doing flips, dismounts, grinds and stalls - chances are you'll need to replace your bushing eventually. This snap-in plastic bushing is easy to replace and is built to last. Be sure to keep your shaft clean from nicks and dings - this will help ensure a long bushing lifespan. Warning This online replacement part fits V2 and V3 models only!
  • V3 Footpeg

    The aluminum V3 footpeg with the TITS traction control makes sure that your feet stay exactly where they need to be during your epic bounce sessions. Cast from only the highest quality aluminum and then heat treated into their rock solid state, these professional pogo stick foot pegs are designed with safety and performance in mind. Order this pogo stick replacement part from Vurtego today. We also offer a V4 Traction Peg.
  • Piston

    Under strict supervision, our nylon pistons are injection molded to within .003" for maximum air sealing. And if your nylon piston is already working perfectly (as it should be), you can always buy one of these bad boys to toss around in the backyard. Their hollowed out underside makes them a perfect new-age frisbee! Order this piston replacement from Vurtego today.
  • V4 Pro Bushing

    The V4 Pro bushing fits both the V4 and V4 Pro models. We recommend replacing the bushing when the plastic wears down enough to allow the shaft to significantly wiggle from side to side. Designed with built-in lube pockets, the V4 Pro plastic bushing sleeve reduces surface area by 78% in comparison to the V4 Bushing and is ready to take you to new heights. Warning This pro pogo stick plastic sleeve bearing fits V4 models only!
  • V4 Traction Peg

    Our V4 Traction Pegs are coated with a specially formulated powder coating to create a griptape-like feel and make sure that your feet stay locked in place on the pogo stick at all times. Shop this traction peg and many more pogo stick accessories at Vurtego today. Warning This pogo stick replacement part fits V4 models only!